Specialty Windows in Austin: Shapes, Glass and Fit

Tier One Custom Windows · Austin, Texas

Specialty windows are windows built in a shape other than a plain rectangle, such as an arch, a circle, a triangle or a trapezoid, and in Austin they have to meet the same energy and safety rules as every other window in the house. The shape changes how the window is measured, whether it can open and how the glass is specified. It does not earn an exemption from the code.

Most questions we hear about specialty windows come down to four things: what shapes exist, whether a shaped window can open, what glass belongs in it, and how an existing shaped opening gets replaced without rebuilding the wall.

What counts as a specialty window?

A specialty window is any window whose frame is not a standard rectangle. Pella, one of the manufacturers we install, sorts its special shapes into three families: round, rectangular and triangular.

The round family covers full circles, half circles, quarter circles, ovals, hexagons and octagons, along with the arch-topped forms the trade calls springlines. The rectangular family covers arch heads, trapezoids and parallelograms. The triangular family covers isosceles, right and truncated triangles.

Pella states that its fixed wood, fiberglass and vinyl windows are available in 15 special shapes. That number is a manufacturer's catalog, not a ceiling. A shape drawn to match one gable or one stair wall is still a specialty window, and it is usually a custom order.

Can a specialty window open, or are they all fixed?

Most specialty windows are fixed, and a smaller set can open. Pella's own count shows the gap: operable custom wood windows come in five shapes, against 15 special shapes for fixed windows.

The operable options Pella names for wood include a springline single-hung, which is a single-hung window with an arched top, and a trapezoid casement. If you need air from a shaped opening, material matters, because the operable shapes Pella lists are wood. Pella also notes that vinyl shape availability varies by product series, so a shape offered in one line may not be offered in another.

A common answer when a homeowner wants both the shape and the breeze is a combination: a fixed shaped unit set above or beside a standard operable window. The arch stays, and the window below it does the opening.

What glass should a specialty window have in Austin?

A specialty window in Austin should carry the same low solar heat gain glass as the rest of the house, and stricter glass if it faces east or west. Shaped windows are often set high on a gable or stair wall where no overhang shades them, which makes the glass specification matter more, not less.

Solar Heat Gain Coefficient, or SHGC, is the number to read. The EPA's ENERGY STAR program describes SHGC as the fraction of solar energy a window transmits on a scale of 0 to 1, where a lower number means less solar heat comes through. U-factor is the second number, and it measures how fast heat moves through the window. Lower is better there too.

The City of Austin Energy Code sets the local floor. Austin sits in Climate Zone 2, and the code's prescriptive values for new construction are a U-factor of 0.35 and an SHGC of 0.28. Section R402.6 goes further for glass within 45 degrees of east or west, where SHGC may be no greater than 0.25 unless the code's shading multiplier applies. ENERGY STAR certification in the South-Central zone, which includes Austin, asks for a U-factor of 0.28 or lower and an SHGC of 0.23 or lower.

None of those numbers has a carve-out for a circle or a triangle. If your tall arched window faces the afternoon sun, our post on west-facing windows and Austin heat explains why that elevation gets its own rule.

When does a specialty window need safety glass?

A specialty window needs safety glass when it sits in what the building code calls a hazardous location, and large low windows are the usual case. Section R308 of the 2021 International Residential Code, in its rule for glazing in windows, applies when all four conditions are met: the pane is larger than 9 square feet, its bottom edge is less than 18 inches above the floor, its top edge is more than 36 inches above the floor, and a walking surface is within 36 inches of the glass.

A floor-level trapezoid in a great room or a tall arch beside a stair landing can meet all four. A small octagon high on a wall usually does not. This is worth settling at the measuring stage, because the glass is made to order and cannot be swapped after the unit arrives.

How is an existing specialty window replaced?

An existing specialty window is replaced by measuring the opening's actual shape and ordering a unit built to it. Pella says all of its windows are built to order and that its custom capabilities allow matching the shape of an existing opening for a precise fit.

In practice that means templating a curve instead of trusting a tape measure. Arches in particular are rarely the perfect half circle they look like from the driveway. The radius, the height where the curve begins and the squareness of the legs all get recorded before an order is placed.

Matching the rest of the house is the second half of the job. Pella notes that its special shape windows can use the same grille patterns as its standard windows and patio doors, which is how a new arch reads as original next to the windows below it. Where the opening itself needs work, our crew handles the reframing, drywall, stucco, brick and stone around it, so the window and the wall are one job.

Talk through your shape before you order

Tier One Custom Windows is an Austin-based, family-owned Pella Certified Contractor with 30 plus years of combined team experience. We measure, specify and install custom windows and doors across Central Texas, and our Pella partner page covers the product lines we install.

Call (512) 615-8629 or book a free on-site consultation. We will measure the opening, tell you whether the shape can open, and specify the glass for the direction it faces.

Sources: Pella, Custom Windows and All About Specialty Window Shapes; City of Austin, Energy Code, Article 12; EPA ENERGY STAR, energy performance ratings; International Code Council, 2021 IRC section R308.

Talk to us about your project

Free on-site consultation and a no-obligation quote, anywhere in Central Texas.

(512) 615-TOCW info@tocw.com

Mon–Fri 9am–6pm · Sat 9am–2pm · Closed Sunday
Based in Austin — serving all of Central Texas

Flexible financing available through GreenSky®. No credit-check pre-approval.